top of page
Articles
Proper TO-35 Gray
I recently acquired a 1955 TO-35 Deluxe, S/N 165398. Is the proper Ferguson light-gray paint for this tractor similar to the Ford...
Alexander Stuck
Sep 30, 2024
Proper Thrust Bearing Orientation
I am getting the 35 back together. Soon it will be time to get the green paint out. The thrust bearings at the bottom of the front...
Alexander Stuck
Sep 30, 2024
Proper Regulator Mounting
Hello, how is the regulator attached to my Ferguson 30? A picture of proper mounting would be great. It looks like the past owner just...
Alexander Stuck
Sep 30, 2024
Proper Rear Tire Pressure
Looking for advice on proper pressure in rear tires, Goodyears. The cap on the valve stem seemed frozen on. When I used a vise grip to...
Alexander Stuck
Sep 30, 2024
Proper Post-Hole Digger for TO-30
I am looking to mount a post-hole digger on my TO-30 with 3 point hitch. Any input into where to start looking for an appropriate model?...
Alexander Stuck
Sep 30, 2024
Proper MF-65 PTO Oil Seal Orientation
Which way does the PTO oil seal install on a MF-65. The seal has a flat side and a side with the part markings and a raised lip. Which...
Alexander Stuck
Sep 30, 2024
Proper Jacking Point for Pivot Bushing Service
What is the preferred jacking point on a TO-30 to take weight off the front axle when replacing the pivot bushing? March 24, 2015. The...
Alexander Stuck
Sep 30, 2024
Proper In-Hose Thermostat
I purchased a replacement thermostat from Yesterdays Tractors as my newly purchased Fergie was missing the thermostat. My manual says it...
Alexander Stuck
Sep 30, 2024
bottom of page
